WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use
Huskie Tools is not affiliated with, authorized, or endorsed by Milwaukee Electric Tool Corporation. Milwaukee listed batteries and chargers are being re-sold by
Huskie Tools. Milwaukee® M18™ REDLITHIUM™ are registered trademarks of Milwaukee Electric Tool Corporation. Huskie Tools is not affiliated with, authorized, or
endorsed by Makita® Corporation. Makita® listed batteries and chargers are being re-sold by Huskie Tools. Makita® and LXT® are registered trademarks of Makita®
Page 1
Huskie Tools. Milwaukee® M18™ REDLITHIUM™ are registered trademarks of Milwaukee Electric Tool Corporation. Huskie Tools is not affiliated with, authorized, or endorsed by Makita® Corporation. Makita® listed batteries and chargers are being re-sold by Huskie Tools. Makita® and LXT® are registered trademarks of Makita®...
Page 2
BUILT FOR EVERYTHING THAT’S ON THE LINE. ™ HUSKIETOOLS.COM PRE-USE CHECKLIST: Visually confirm there are no missing or broken components. If found, stop use and have the tool checked by a qualified technician. Check and ensure triggers are moving freely with no binding. Rotate head where applicable to ensure it rotates 180 degrees.
Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable- related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. TABLE OF CONTENTS...
Note: Weight and Dimensions taken w/o battery Huskie Tools is not affiliated with, authorized, or endorsed by Milwaukee Electric Tool Corporation. Milwaukee listed batteries and chargers are being re-sold by Huskie Tools. Milwaukee® M18™ REDLITHIUM™ are registered trademarks of Milwaukee Electric Tool Corporation. Huskie Tools is not affiliated with, authorized, or endorsed by Makita®...
Failure to observe this warning could result in severe injury or death. DO NOT DISCARD THIS PRODUCT OR THROW AWAY! FOR RECYCLING INFORMATION, CONTACT 800-822-8837 SLA-730Y OPERATOR MANUAL...
SAFETY INFORMATION WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. •...
The auto retract feature can be toggled on or off depending on user preference or specific job requirement. To turn auto retract on or off - toggle switch as shown below Selectable Auto-Retract Switch Release Trigger Advance Trigger SLA-730Y OPERATOR MANUAL...
TROUBLESHOOTING GUIDE BEFORE YOU BEGIN 1. Make sure that the battery is charged and is a 5.0Ah or below. Recheck the battery after several minutes to make sure the battery is holding its charge. Use a nonflammable contact cleaner or pencil eraser to clean the electrical contacts on the battery and tool.
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages.
Need help?
Do you have a question about the SLA-730Y and is the answer not in the manual?
Questions and answers