Related Manuals for Huskie Tools ECO-MK7500
Summary of Contents for Huskie Tools ECO-MK7500
- Page 1 OPERATOR MANUAL FOR MODEL: ECO-MK7500 6 Ton Battery Operated Inline Cutting Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: ECO-MK7500 THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
MODEL: ECO-MK7500 DESCRIPTION The ECO-MK7500 is a Inline Battery-Powered Cutting tool with a 6-ton output. The intended use of this tool is to cut copper and aluminum. WHAT’S INCLUDED EACH TOOL KIT INCLUDES THE FOLLOWING: • Tool with jaw • 18V-2.0Ah battery pack •... -
Page 5: Safety Symbols
Failure to observe “power tool” in all warnings refers to your battery this warning could result operated (cordless) power tool. in severe injury or death. Do not discard this product or throw away! For recycling information, contact 800-822-8837 ECO-MK7500 - OPERATOR MANUAL... -
Page 6: Safety Information
Liquid ejected from the battery may cause irritation or burns. contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. ECO-MK7500 - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. • To reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other types of batteries may burst causing personal injury and damage. •...
-
Page 8: Operating Instructions
A series of clicks will be heard while the tool running in a “neutral” mode. This indicates that the tool has built full pressure and bypassed and can now be released. ü ü Figure 8A. Correct material placement. Figure 8B. Incorrect material placement. ECO-MK7500 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
Connector is jammed in tool Press and hold release trigger jaws while prying tool jaws apart Release trigger is bent or mis- Consult factory for repair service aligned ECO-MK7500 - OPERATOR MANUAL... -
Page 10: Maintenance Notes
MODEL: ECO-MK7500 MAINTENANCE NOTES ECO-MK7500 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Glendale Heights, IL 60139 Phone 800-860-6170 Fax 800-345-3767 www.HuskieTools.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2019 Huskie Tools, Inc. All Rights Reserved.