JUNO JKI 4035 Operating Instructions Manual page 20

Malfunction
The food is too warm.
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
The compressor does not
start immediately after
changing the temperature
setting.
Water on the floor or on
storage shelves.
44
Possible Cause
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Light bulb is defective.
Door seal is not air tight
(possibly after changing
over the hinges).
This is normal, no error has
occurred.
Water drain hole is
blocked.
Remedy
Please look in the "Starting
Up - Setting the Tempera-
ture" section.
Open the door only as long
as necessary.
Turn the temperature regu-
lator to a colder setting
temporarily.
Please look in the "Installa-
tion Location" section.
Please look in the "Chang-
ing the Light Bulb" section.
Carefully warm the leak-
ing sections of the door
seal with a hair dryer (not
hotter than approx. 50 °C).
At the same time shape the
warmed door seal by hand
such that it sits correctly.
The compressor starts after
a period of time.
See the "Cleaning and
Maintenance" section.