AJAX Button User Manual page 7

You can adjust the device parameters in the settings section:
1. Ajax app → Devices
Parameter
Name
Room
Battery charge auto-check
Notify if the device was unreachable for 3 days
Operating mode
→ Button → Settings
Value
Name of the device, can be changed.
The choice of the virtual room that the device is
assigned to.
If the toggle is enabled, the system checks the
battery state of the device once a day. If the auto-
check is disabled, the battery state updates only
when the device is pressed.
The feature is available for buttons
with firmware version 6.60.0.13
and later. When added to a hub
with OS Malevich version 2.17 and
later (except Hub (2G) Jeweller
and Hub (4G) Jeweller).
When the toggle is enabled, the user receives a
corresponding notification if the button has not
communicated with the hub for three days. The
setting is available when the Battery charge
auto-check toggle is enabled.
Displays the operating mode of the button. Three
modes are available:
Panic — sends an alarm when pressed.
Control — controls automation devices by
short or long (3 sec) pressing.
Mute Fire Alarm — when pressed, mutes the
alarm of Ajax fire detectors. The option is
available if Interconnected Fire Alarm
is enabled.
Learn more
feature