Use Of The Freezer; Control Panel - JUNO JCG 94185 Manual

Use of the freezer

Control Panel

H - On/OFF light
I - Appliance - button ON/OFF
J - Temperature setting button
(warmest)
K - Temperature indicator
H - Light ON/OFF
I. Button ON/OFF
ON: Press the button (I). The pilot
light (H) switches on.
OFF: Keep pressed the button (I) until
the pilot light (H) and the
temperature indicator switches
off.
J - L. Temperature
setting buttons
The temperature can be adjusted
between -15°C and -24°C.
By pressing the button (J or L), the
current temperature setting flashes on
the indicator. It is possible to modify
the setting temperature only with
flashing indicator. To set a warmer
temperature, press button (J). To set a
colder temperature, press button (L).
L - Temperature setting button (coldest)
M - Super frost light
N - Super frost button
O - Alarm reset light
P - Alarm reset button
The indicator displays the newly
selected temperature for a few
seconds and then shows again the
inside compartment temperature.
Attention!
During the stability period and when
first starting the appliance the
temperature displayed doesn not
correspond to the setting temperature.
During this time it is possible that the
temperature displayed is lower than
the setting temperature.
electrolux 35