interior.qxd
5/4/04
1. DESCRIPTION (Fig 1)
A.
Air intake grille.
B.
Air outlet grille.
C.
Thermostat control.
D.
Function selector.
E.
ON/OFF pilot light.
F.
Cable storage.
2. TECHNICAL DETAILS
Voltage - Frequency: 230V~50 Hz.
Wattage:
Position 1: 1,000W.
Position 2: 2,000W.
3. CONTROL PANEL (Fig. 2)
1.
Thermostat control.
= Anti-freeze.
2.
ON/OFF pilot light.
3.
Function selector.
O = Off.
= Fan.
1 = Minimum.
2 = Maximun.
How to switch the appliance on
Turn the thermostat control in a
clockwise direction to maximum, and
then select the power setting by turning
the function selector to either 1 or 2:
Minimum 1,000W
Maximum 2,000W
18:19
Página 4
EN
Position 1
Position 2
5
Thermostat
When the temperature in the room has
reached the required level, slowly turn
the thermostat control in an
anticlockwise direction until you hear a
click. The thermostat will then maintain
the established temperature.
In spring or autumn, or on days that are
not especially cold, select the minimum
power setting for extra low energy
consumption.
Antifreeze setting
Turn the thermostat control to
set the function selector to position 2.
The appliance will now maintain a
room temperature aprox of 5ºC,
thereby preventing ice from forming
with minimum energy consumption.
Summer service
Turn the function selector to
only). In this position, the appliance will
operate as a fan.
How to switch the appliance off
To switch the appliance off, turn the
function selector to "O".
4. MAINTENANCE
Make sure that the appliance is
unplugged from the mains supply
before carrying out any cleaning or
maintenance operations.
Clean the air intake and outlet grilles
frequently with a vacuum cleaner.
Do not use water, detergents, abrasive
powders or solvents to clean the
appliance.
and
(fan