Notes On Safety; Special Notes On Safety - Endress+Hauser Soliphant II Operating Instructions Manual

1 Notes on Safety

Approved usage
Installation,
Commisioning,
Operation
Explosion hazardous
areas
4
1 Notes on Safety

1.1 Special Notes on Safety

The Soliphant FTM .. DR is used for limit detection with powdered or fine-grained solids.
See Technical Data for temperature, pressure, mechanical loads and bulk solids
characteristics.
The Soliphant has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for applications for
which it is not intended, however, it is possible that application-related dangers may
arise, e.g. product overflow or explosion in a flammable atmosphere.
For this reason the instrument must be installed, connected, operated and maintained
according to the instructions in this manual; personnel must be authorized and
suitably qualified. The manual must have been read and understood, and the
instructions followed. Modifications and repairs to the device are permissible only
when they are expressly approved in the manual.
If the Soliphant is to be installed in an explosion hazardous area, then the
specifications in the certificate as well as all national regulations must be observed.
Classes, Divisions and Groups are different according to FM or CSA approval,
see Product Structure.
• Ensure that all personnel are suitably qualified.
• Observe the regulations concerning measurement and safety at the measuring point.
FTM 30 DR, FTM 31 DR, FTM 32 DR