Using The Menu - Zoom Multistomp MS-80IR+ Quicktour

Using the MENU

Adjust the overall volume.
Change the position in the patch memory
from which the R channel signal is output.
The BPM, which is used for the tempo
synchronization of delay time, for example,
can be set separately for each patch
memory.
Copy a patch memory and save it in a
different location.
Delete a patch memory.
Turn the preselect function on/off.
Set the type of batteries.
Adjust the display contrast.
Adjust the monitoring balance for USB
AUDIO.
Change the patch memory name.
Change the effect order.
This restores a changed patch memory
to the state it was in immediately after
selection or to its factory default settings.
Create a new patch memory.
Turn the automatic saving function on/off.
The output sound on the LIBRARY Screen
(when changing effects) can be set to
either just the selected effect or the entire
patch memory.
Set the backlight brightness.
Turn the ECO mode on/off.
Adjust the volume (recording level) sent to
the computer, smartphone or tablet using
USB AUDIO.
10
MENU Screen