Using The Menu - Zoom MULTISTOMP MS-50G+ Manual

Using the MENU

The BPM, which is used for the tempo
synchronization of delay time, for example,
can be set separately for each patch
memory.
Change the effect order.
Change the patch memory name.
This restores a changed patch memory
to the state it was in immediately after
selection or to its factory default settings.
Copy a patch memory and save it in a
different location.
Create a new patch memory.
Delete a patch memory.
Adjust the overall volume.
Turn the automatic saving function on/off.
See the Operation Manual for detailed information about all the functions.
Turn the preselect function on/off.
The output sound on the LIBRARY Screen
(when changing effects) can be set to
either just the selected effect or the entire
patch memory.
Set the type of batteries.
Set the backlight brightness.
Adjust the display contrast.
Turn the ECO mode on/off.
Restore the factory default settings.
Check firmware versions.
Use a smartphone to scan a 2D code and
access detailed documents related to the
product.
9
MENU Screen