Labeling The Channels - Akai PT50DL14 Owner's Instructions Manual

Labeling the Channels

Use this feature to assign an easy-to-remember label to analog channels (i.e., "CBS", "ESPN",
"PBS2", CNN02", etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below to the channel number.
NOTE
• If you add or delete a
TV channel, the
labeled channels will
also be added or
deleted.
1
Press the CH or CH
will be labeled.
2
Press the MENU button.
Press the ... or † button to
select "Channel", then press
the ENTER button.
Press the ... or † button to
select "Name", then press
the ENTER button.
3
Press the ... or † button to
move to the channel to be
assigned to a new name,
then press the ENTER button.
Press the ... or † button to
select a letter, a number or a
blank. (Results in this
sequence: A...Z, 0...9, +, -,
✽, /, blank).
4
Press the √ button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing ... or † button, as
above.
Repeat the process to select
the last three digits.
When you have finished,
press the ENTER button.
To erase the assigned new
name, select "Clear" by
pressing the œ or √ button,
then press the ENTER button.
Press the EXIT button to exit.
button to tune to the channel that
Channel
Input
Antenna : Air
Auto Program
Picture
Add/Delete
Favorite Channels
Sound
Name
Channel
Fine Tune
Signal Strength
Setup
LNA : On
Guide
Move
Name
Input
▲
Air 2 A
Clear
Picture
▼
Air 3
Clear
Sound
Air 4
Clear
Air 5
Channel Clear
Air 6 Clear
Setup
▼
Guide
Move Adjust
Name
Input
▲
Air 2 CNN02
Clear
Picture
▼
Air 3
Clear
Sound
Air 4
Clear
Air 5
Channel Clear
Air 6
Clear
Setup
▼
Guide
Move Adjust
√
√
√
√
√
√
√
√
Enter Return
OK
Return
OK
Return
English - 47