Troubleshooting - Aiwa XR-M33 Operating Instructions Manual

4
5
Extension cord — To help prevent electric shock, do not use a
polarized AC power plug with an extension cord, receptacle, or
other outlet unless the polarized plug can be completely inserted
to prevent exposure (ofthe blades of the plug.
When not in use — Unplug the AC power plug from the power
socket if the unit will not be used for several months or more.
When the cord is plugged in, a small amount of current continues
to flow to the unit, even when the power is turned off.
Outdoor Antenna
1 Power lines — When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding — Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, AN S1/NFPA70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals.
Antenna Grounding According to the National Electrical Code
Ti=-
A NTENNA LEAD IN WIRE
DISCHARGE UNIT
I —1 Iv I
,,.ti-..-
FION 810-20)
NEC-NATIONAL ELECTRICAL CODE —
ELECTRODE !
------ ---
Maintenance
Clean the unit only as recommended in the Operating instruc-
tions.
Damaae Reauirina Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
Owner's record
For your convenience, record the model number and serial
number (you will find them on the rear of your set) in the space
provided below. Please refer to them when you contact your Aiwa
dealer in case of difficulty.
PRECAUTIONS .................................................................,, 1
PREPARATIONS
——
CONNECTIONS ................................................................. 3
REMOTE CONTROL ...........................................................5
BEFORE OPERATION ............................................m ...........5
SOUND
AUDIO ADJUSTMENTS .................................................... 6
GRAPHIC EQUALIZER ......................................................6
RADIO RECEPTION
MANUAL TUNING ...............................................................7
PRESETTING STATIONS ...................................................8
CD PLAYING
BASIC OPERATIONS
. . . . . . . ..m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
PROGRAMMED PLAY ..................................................... 10
TAPE PLAYBACK
BASIC OPERATIONS ....................................................... 11
RECORDING
BASIC RECORDING ........................................................ 12
Al EDIT RECORDING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..u . . . . . . . .
13
PROGRAMMED EDIT RECORDING ............................... 14
CLOCK AND TIMER
—
m
SETTING THE CLOCK
. . . . . . . . . . . . . . . . . . . . . . . . . ..m . . . . . . . . . . . . . ..m . . . . . . . .
15
SETTING THE SLEEP TIMER ......................................... '15
SETTING THE TIMER .............................................u ........ 16
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT ....................... 17
LISTENING TO EXTERNAL SOURCES ......................... 17
GENERAL
CARE AND MAINTENANCE ........................................... 18
TROUBLESHOOTING GUIDE ......................................... '18
SPECIFICATIONS ............................................................ '19
PARTS INDEX .................................................................. :20
I Model No. \ Serial No. (Lot No.) I
I XR-M33u
I I
ENGLISH
2