Aiwa NSX-MA945 Operating Instructions Manual page 4

Refer to the diagram on the next page.
The DOLBY PRO LOGIC system which is the biggest feature of
this stereo system provides you with multi channel sound in your
home.
Complete setting and connection of the main unit, supplied
speakers, your TV and video equipment according to the following
procedure.
Check your system and accessories
mmEiEl
CX-NMA945 Com~act disc stereo cassette receiver
SX-WNA999 Front speakers
SX-R275 Surround speakers
SX-C605 Center speaker
Remote control
AM antenna FM antenna
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit is 120 V AC, as specified on the
rear panel. Check that the rated voltage matches your local
voltage,
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no differences between the front speakers. Both
speakers can be connected as L (left) or R (right).
7 Connect the right speaker to the main unit.
@l
Connect the speaker cord with the plug to the SPEAKERS
HIGH FREQ R terminal.
@ Connect the speaker cord with the white stripe to the
SPEAKERS (LOW FREQ + SUB WOOFER) R 0 terminal
and the black cord to the O terminal.
2
3
4
5
6
Sound signals from 5.1 CH SUB WOOFER INPUT jack are
outputted from the built-in subwoofer in the front speakers,
Connect the left speaker to the main unit.
Connect the speaker cord with plug to the SPEAKERS HIGH
FREQ L terminal, and another speaker cord to the
SPEAKERS (LOW FREQ + SUB WOOFER) L terminals in
the same manner as step 1.
Connect the surround speakers.
Connect the surround speaker cords to SURROUND
SPEAKERS terminals.
There is no difference between the surround speakers. Both
speakers can be connected as R (right) or L (left).
Connect the center speaker.
Connect the center speaker cord to CENTER SPEAKER
terminal.
Connect the video equipment.
Connect VI DEO/AUX jack of this unit to the audio output jack
of the video equipment with an optional audio connecting cord.
Connect the Television to the video equipment.
Refer to the Operating Instructions of the connected equipment
for details.
4
ENGLISH