Starting Up; Powering Up The Unit; Startup Screens - SmartVent Balance BAL225 User Manual

Starting Up

Powering Up the Unit

Switching On (The unit is designed to run continuously)
To switch the unit on:
1. Switch on the power at the mains supply isolator feeding the unit.
2. Following switch-on, the fan motors will start and the Control Unit will display a series of startup screens,
described below.
Switching Off
To switch the unit off: at the unit's local isolator, turn the power off.

Startup Screens

SmartVent Balance Version Screen
The SmartVent Balance Version screen displays the
firmware version number for 3 seconds.
No adjustments are possible on this screen.
Language Screen
The Language screen displays the language used for
the screens. It is typically displayed for 5 seconds, or
longer if changing the setting.
Control Mode Screen
Control Mode 01 operation is described herein.
Control Mode 02 is not supported in this model.
Airflow Units Screen
The Airflow Units is a percentage of the unit's
maximum flow.
Wireless Control Screen
The Wireless Control screen automatically displays
whether the wireless boost control switch is fitted.
It is typically displayed for 3 seconds.
Humidity Sensor Screen
The Humidity Sensor screen displays whether the
humidity sensor is fitted. It is typically displayed for
3 seconds.
SmartVent Balance User Manual
V--
Language
English
Control Mode
01
Airflow Units
%
Wireless Control
Not Fitted
Humidity Sensor
Not Fitted
5