SmartVent Balance BAL225 User Manual page 10

Operation and Monitoring
Set Clock Screen
From the Normal Airflow screen, simply press the
button once to access the Set Clock screen.
The Set Clock Control screen enables you to change
the clock settings. The clock retains its settings for
approximately two weeks without mains power, after
which it will need resetting when power is reconnected
Values are DDD HH:MM.
Return to the normal display by pressing the
or leave to timeout and return automatically after 2
minutes.
The unit will not automatically switch for Daylight
saving time.
Summer Mode Screen
From the Set Clock screen, simply press the
twice to access the Summer Mode screen.
If the unit is a summer bypass model, the Summer
Mode screen enables you to switch the summer
bypass control on or off. This screen is only displayed
when the bypass is fitted.
Options available are On (default) and Off.
Return to the normal display by pressing the
or leave to timeout and return automatically after 2
minutes.
Indoor Temp Screen
From the Summer Mode screen, simply press the
button 3 times to access the Indoor Temp screen.
The Indoor Temp screen enables you to choose the
target room temperature in degrees Centigrade – only
displayed when the bypass is fitted.
Selectable range is 16-40 (25 default).
Return to the normal display by pressing the
or leave to timeout and return automatically after 2
minutes.
8
Set Clock
Mon 12:30
button
button
Summer Mode
On
button
Indoor Temp
25 C
button
SmartVent Balance User Manual