Installing Cabling Racks On The S7906E; Installing Mounting Ears And The Cabling Rack On The Other Models - 3Com S7906E Getting Started Manual

Installing Cabling Racks on the S7906E-V
Figure 5-5 Install cabling racks on the S7906E-V
(1) Upward cabling rack
Follow these steps to install cabling racks on the S7906E-V:
1) Place the cabling racks closely against the place where it should be installed on the chassis and
align the screws with the crew holes.
2) Tighten the screws to fix the cabling racks.
There are two cabling racks: upward cabling rack and downward cabling rack. However, they are
installed in the same way.

Installing Mounting Ears and the Cabling Rack on the Other Models

Installing the cabling rack onto a mounting ear
As shown in Figure 5-6, install the cabling rack onto the left mounting ear.
(2) Downward cabling rack
5-8