Lsq1Fv48Sa0 - 3Com S7906E Getting Started Manual

Interface speed
Pluggable module type
Standards
Panel and LEDs
Figure 1-24 LSQ1FP48SA0 panel
Each 100M Ethernet optical port has a green LED.
Table 1-77 Description of the LED of each port on the LSQ1FP48SA0 panel
LED
LINK/ACT

LSQ1FV48SA0

Introduction
The LSQ1FV48SA0 provides forty-eight 10/100M auto-sensing Ethernet electrical ports and can be
upgraded to support the PoE function.
Table 1-78 Technical specifications of the LSQ1FV48SA0
CPU
Boot ROM
DDR SDRAM
Dimensions (H × W × D)
Power consumption
Connector type
Number of ports
Interface speed
Cable medium and maximum
transmission distance
Item
100 Mbps
100 Mbps SFP module
Refer to "Appendix A List of Pluggable Modules."
OFF: No link is present.
ON: A link is present.
Blinking: Data is being transmitted or received.
Item
MIPS64, 400 MHz
512 KB
512 MB
40 × 377 × 355 mm (1.57 × 14.84 × 13.98 in.)
30 W to 35 W
RJ-45
48
Category-5 twisted pair with the maximum transmission
distance of 100 m (328.08 ft.)
Specifications
IEEE 802.3-2005
IEEE 802.1D-2004
IEEE 802.1Q-2003
IEEE802.1X-2004
Table 1-77 describes the LED.
Description
Specifications
10/100 Mbps, half/full duplex
MDI/MDI-X auto-sensing
1-43