Beeper Definitions - Motorola LS2208-SR20001R Product Reference Manual

2 - 2 Symbol LS2208 Product Reference Guide

Beeper Definitions

The scanner communicates by emitting different beeper sequences and patterns.
sequences that occur during both normal scanning and while programming the scanner.
Standard Beeper Definitions
Table 2-1
Standard Use
Low/medium/high beep
Short high beep
4 long low beeps
5 low beeps
Lo/hi/lo beep
Hi/hi/hi/lo beep
Parameter Menu Scanning
Short high beep
Lo/hi beep
Hi/lo beep
Hi/lo/hi/lo beep
Low/hi/low/hi beep
Code 39 Buffering
Hi/lo beep
3 Beeps - long high beep
Lo/hi/lo beep
Lo/hi beep
Beeper Sequence
Table 2-1
Indication
Power up.
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error was detected in a scanned
symbol. The data is ignored. This occurs if a unit is
not properly configured. Check option setting.
Conversion or format error.
ADF transmit error.
RS-232 receive error.
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel" scanned,
wrong entry, incorrect bar code programming
sequence; remain in program mode.
Keyboard parameter selected. Enter value using bar
code keypad.
Successful program exit with change in the
parameter setting.
Out of host parameter storage space. Scan Set
Default Parameter on page 4-3.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The Code 39 buffer was erased or there was an
attempt to clear or transmit an empty buffer.
A successful transmission of buffered data.
defines beep