Motorola LS2208-SR20001R Product Reference Manual page 190

12 - 30 Symbol LS2208 Product Reference Guide
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a
dash (minus), and a stop character.
•
The scanner issues a short high/low/high beep.
•
The scanner erases the transmission buffer.
•
No transmission occurs.
NOTE The Clear Buffer contains only the dash (minus) character. In order to scan this command, set Code 39
length to include length 1.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
Scan the Transmit Buffer bar code below, which contains only a start character, a plus (+), and a stop
1.
character.
•
The scanner transmits and clears the buffer.
•
The scanner issues a low/high beep.
Scan a Code 39 bar code with a leading character other than a space.
2.
•
The scanner appends new decode data to buffered data.
•
The scanner transmits and clears the buffer.
•
The scanner signals that the buffer transmitted with a low/high beep.
•
Scanner transmits and clears the buffer.
NOTE The Transmit Buffer contains only a plus (+) character. In order to scan this command, set Code 39 length
to include length 1.
Clear Buffer
Transmit Buffer