Rule 1: The Code 128 Scanning Rule
Step
Bar Code
1
Begin New Rule
2
Code 128
3
Send next 5 characters
4
Send <CTRL M>
5
Send next 5 characters
6
Send <CTRL P>
7
Send next 2 characters
8
Send <CTRL D>
9
Save Rule
Rule 2: The UPC Scanning Rule
Step
Bar Code
1
Begin New Rule
2
UPC/EAN
3
Send all remaining data
4
Send <CTRL M>
5
Save Rule
If you made any mistakes while entering this rule, scan
rule, scan
Erase Previously Saved Rule on page
Alternate Rule Sets
You can group ADF rules into one of four alternate sets which you can turn on and off when needed. This is useful
to format the same message in different ways. For example, a Code 128 bar code contains the following
information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily you would send this data as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)
On Page
Beep Indication
14-6
High High
14-9
High High
14-20
High High
14-39
High High
14-20
High High
14-40
High High
14-20
High High
14-38
High High
14-6
High Low High Low
On Page
Beep Indication
14-6
High High
14-10
High High
14-20
High High
14-39
High High
14-6
High Low High Low
Quit Entering Rules on page
14-7.
Advanced Data Formatting 14 - 3
14-7. If you already saved the