Table of Contents
Advertisement
D
S
EFAULT
ETTINGS
Many functions of the scanner can be configured or enabled/disabled.
The scanner is shipped from the factory configured to a set of default conditions.
All default parameters of the scanner have an asterisk ( * ) marked in the default
column. If an asterisk is not in the default column then the default setting is off or
disabled. Not every interface supports every parameter. A check
mark ( ) will appear in the interface column if it supports the parameter listed.
Parameter
Normal Scan Mode
Continuous Scan Mode
Blinky Scan
Continuous Blinky Scan
Custom (one shot) Scan
Manual Activation Mode
Long-Range In-Stand
Short-Range In-Stand
Long-Range Out-of-Stand
Short-Range Out-of-Stand
CodeGate Active In-Stand
CodeGate Inactive In-Stand
CodeGate Active
Out-of Stand
CodeGate Inactive
Out-of Stand
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 check on ITF
Code 11
Code 39
Full ASCII Code 39
Light
Default
RS232
Pen
*
*
*
*
*
*
*
*
*
*
*
RS485 KBW USB
Laser Emulation
33
Advertisement
Table of Contents
