D-Link DES-3250TG User Manual page 81

The following fields can be set:
Parameter
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 32. Traffic Control Setting window
Group <1>
Broadcast Storm
<Disabled>
Multicast Storm
<Disabled>
Destination Lookup
Fail <Disabled>
Threshold <128>
Description
Select the desired group of ports from the
drop-down menu.
This field can be toggled between Enabled
and Disabled using the drop-down menu.
This enables or disables, globally, the
Switch's reaction to Broadcast storms,
triggered at the threshold set in the last field.
This field can be toggled between Enabled
and Disabled using the drop-down menu.
This enables or disables, globally, the
Switch's reaction to Multicast storms,
triggered at the threshold set above.
This field can be toggled between Enabled
and Disabled using the drop-down menu.
This enables or disables, globally, the
Switch's reaction to Destination Address
Unknown storms, triggered at the threshold
set above.
This is the value in units of packets per
second, beyond which the ingress port for
that block discards packets. Each port
contains three counters, one each for
Broadcast, Multicast, and Destination
71