Router Port; Port Access Control; Authenticator Status - D-Link DES-3250TG User Manual

D-Link DES-3250TG Standalone Layer 2 Switch
This read-only window displays information about the switch's current VLAN configuration.

Router Port

This displays which of the switch's ports are currently configured as router ports. A router port configured by a user (using the
console or Web-based management interfaces) is displayed as a static router port in the first two rows of the Router Port
window. A router port that is dynamically configured by the switch is located in the third and fourth rows.
To view the Router Port table, click on the Router Port link on the Monitoring menu:
Figure 9- 20. Router Port window
Static router ports are configured by the user and dynamically assigned router ports are configured by the switch.

Port Access Control

Authenticator Status

To view the Authenticator Status for Auth PAE State, Backend State, and Port Status, click on the Authenticator State link on
the Port Access Control folder on the Monitoring menu:
143