D-Link DES-3250TG User Manual page 138

Figure 9- 6. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)
The following fields can be set:
D-Link DES-3250TG Standalone Layer 2 Switch
Parameter
Time Interval [1s ]
Record Number [200]
Unicast
Multicast
Broadcast
Show/Hide
Clear
Description
Select the desired setting between 1s and 60s,
where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be
polled between 20 and 200. The default value
is 20.
Counts the total number of good packets that
were received by a unicast address.
Counts the total number of good packets that
were received by a multicast address.
Counts the total number of good packets that
were received by a broadcast address.
Check whether or not to display Multicast,
Broadcast, and Unicast Packets.
Clicking this button clears all statistics
counters on this window.
128