D-Link DES-3250TG User Manual page 64

To add a new multicast MAC address to the switch's forwarding table, click the Add button:
The following fields can be set:
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 19. Static Multicast Forwarding Settings window
Figure 7- 20. Setup Static Multicast Forwarding Table window
Parameter
VID
Multicast MAC Address
Port
None
Egress
Description
Allows the entry of the VLAN ID of the
VLAN the MAC address below is a member
of.
Allows the entry of the multicast MAC
address of an end station that will be entered
into the switch's static forwarding table.
Select the port number on which the MAC
address entered above resides.
Specifies the port as being none.
Specifies the port as being a source of
multicast packets originating from the MAC
address specified above.
54