Safran VersaSync Getting Started Manual page 35

3.2 Regulatory Compliance
This product has been tested and found to be in compliance with the following
regulatory publications:
MIL compliance
VersaSync Getting Started Guide Rev. 10
DANGER! — INSTALLATION OF EQUIPMENT:
Installation of this product is to be done by authorized service per-
sonnel only. This product is not to be installed by users/operators
without legal authorization.
Installation of the equipment must comply with local and national
electrical codes.
DANGER! — DO NOT OPEN EQUIPMENT, UNLESS AUTHORIZED:
The interior of this equipment does not have any user serviceable
parts. Contact Orolia Technical Support if this equipment needs to
be serviced. Do not open the equipment. Follow Orolia Safety
Instructions, and observe all local electrical regulatory requirements.
Caution: Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling
equipment.
Tested in accordance with MIL-STD-810G:
MIL-STD 810G, 506.6
MIL-STD 810G, 509.6
MIL-STD 810G, 516.7
MIL-STD 810G, 514.7
3.2 Regulatory Compliance
29