Safran VersaSync Getting Started Manual page 33

To restore the default I/O pin configuration:
Reloading the Current I/O Configuration
To reload the currently used I/O configuration after adding pin layout changes,
but before clicking Apply Changes:
VersaSync Getting Started Guide Rev. 10
A. Navigate to the MANAGEMENT: NETWORK > Pin Layout
B. In the Actions panel on the left, click
A. Navigate to the MANAGEMENT: NETWORK > Pin Layout
B. In the Actions panel on the left, click
2.3 Assigning I/O Pins
Restore Default Layout.
Reload Layout.
screen.
screen.
27