Lock Code; Memory - Miele WT 2780 Operating Instructions Manual

Settings menu

Lock code

The code prevents the machine
being used without your knowledge.
When the code has been activated, you
have to enter a code after switching the
machine on. Otherwise it cannot be
operated.
To activate the lock code
Lock code
Activate
Back
^ Select Activate and confirm your
selection.
The display will now request that a
code is entered. The code is 125 and
cannot be altered.
Enter the lock code
Lock code
0 0 0
^ Use the X or Y buttons to change the
first digit. Confirm your selection by
pressing the OK button. Now enter
the second digit.
^ Repeat the process until all three
digits have been entered and confirm
your entry of the last one by pressing
the OK button.
76
^ Once the machine is switched off, it
can only be used again if the lock
code is entered.
The lock will now be activated when the
machine is switched off.
To unlock the machine
When the machine is switched on
again, the display will request the code.
^ Enter code 125 as described above
and confirm the entry.
The machine is now unlocked.
To deactivate the lock code
Proceed as for activating the lock code.

Memory

If an extra option has been selected
for a programme, or the
recommended spin speed has been
altered, the machine will store the
changes in memory at the start of a
programme.
When this programme is chosen again
these settings will appear in the
display.
The machine is delivered with this
option set at: Off