Problem Solving Guide; Troubleshooting; The Programme Does Not Start - Miele WT 2780 Operating Instructions Manual

Problem solving guide

With the help of the following notes, minor faults in the performance of this
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.

The programme does not start.

Problem
The display remains
dark and the
programme selector is
not lit up.
You are asked to enter
a code.
The programme does
not start when Drain/
Spin has been
selected.
The display is dark.
52
Possible cause
There is no power to
the machine.
Access via a code has
been activated. See
the Settings menu.
The machine has not
been prepared for
using for the first time.
The display has
switched off
automatically to save
energy (Standby
mode).
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
Enter the code and confirm
the entry. Deactivate the
code if you do not wish this
message to appear in the
display the next time the
machine is switched on.
Prepare the machine as
described in "Before using for
the first time".
Press a button. The machine
comes out of standby mode.