Delay Start - Miele WT 2780 Operating Instructions Manual

Delay start

With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours,
The current time of day needs to
have been set for Delay start to work
correctly.
Select Delay start
^ Select the programme you want and
then press the + button.
Delay start
Start time
Finish time
The display shows the current time of
day and the time the programme is due
to end.
^ Use the Y button to select the time
you want the programme to end at.
Delay start
Start time
Finish time
The first press on the button will adjust
the programme end time to the next 15,
30, 45 minutes or full hour. Each
subsequent press on the button will
delay the programme end time by 15
minutes.
^ Confirm your selection by pressing
the OK button.
48
To begin Delay start
^ Press the Start/Stop button.
Altering Delay start
^ Press the + button.
^ Use the X or Y buttons to change the
^ Confirm your selection by pressing
Cancelling delay start
^ Press the Start/Stop button.
9:51
^ Cancel delay start will appear in the
9:51
11:19
^ Confirm with OK.
^ Press the Start/Stop button to start
The actual load size can only be
determined accurately by the machine
once the programme has started. The
9:51
programme end time may, therefore, be
a bit later or earlier than first indicated.
9:51
15:00
programme end time.
the OK button.
display.
the programme straight away or
select a different programme.