Advertisement
Installing the Stacking Kit (Fig.3)
After removing the washer lid, lay the
stacking into position on top of the
washer.
• Secure the stacking kit with the
screws provided.
o 2 screws with star washers in
the rear (a)
o 4 screws without star washers
on top.
Dryer Installation (Fig. 4)
• Adjust the dryer feet to ¾"
as shown. (a)
• Make sure the flat side of
foot pad faces forward. (a)
• Place the dry in the guides
of the stacking kit and slide
back into position.
• Install the retaining brackets and secure
with the provided screws. (b)
• Reinstall the shelf.
a
Note
Use caution when lifting heavy objects
¾"
a
Fig. 4
Fig.3
b
Advertisement
