System Settings; Identify Web-Based Management Utility - D-Link Web Smart DES-1228P User Manual

5 Configuration

System Settings

By selecting Static and clicking Apply you can manually change the system IP Address, Subnet Mask, and
Gateway address. You can further configure and read more about the above settings in the "Setup Menu >
System > System Settings". The default setting of System IP address is DHCP.
If you want to change the IP settings, click YES and start a new web browser.

Identify Web-based Management Utility

After clicking the Exit button in Smart Wizard you will see the screen below:
Figure 29 – Configure System IP address in Smart Wizard
NOTE: Changing the system IP address will
disconnect you from your internet connection,
please enter the correct IP address in the Web
browser and make sure your PC is in the same
subnet with the switch. See
Management Utility
Figure 30 – Confirm the changes of IP address in Smart Wizard
D-Link Web Smart Switch User Manual
Login Web-based
for detail description.
2 0
2 0