Silvercrest SMWC 700 D1 Operation And Safety Notes page 10

Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label.
Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames.
Positioning the product
m ATTENTION! Do not install
the product above a cooker
or any other heat-generating
device. Installation in such a
location could cause damage
to the product.
Operation
m DANGER! Risk of fire!
Remove all metallic closures
from the packaging of the food
that you intend to heat.
Do not move the product while
it is in operation.
Never operate the product
when it is empty.
Do not place the product on
hot plates (gas, electric, coal
cooking range etc.). Operate
the product on a level, stable,
clean, heat-resistant and dry
surface.
Do not place flammable
materials close to the product.
The product is not intended
to be operated by means of
an external timer or separate
remote control system.
Cleaning and care
m WARNING! Risk of
injury! Disconnect the product
from the power supply before
cleaning work and when not in
use.
Do not pull the power plug out
of the electrical outlet by the
power cord.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping
and splashing water.
Do not remove the light
grey mica cover plate,
which is mounted inside
the cooking chamber to
protect the magnetron.
If the luminary inside the
product needs replacing,
have this done by a qualified
specialist.
GB/IE/NI 11