Changing The Programme Sequence - Miele T 234 C Operating Instructions Manual

F Remove the laundry
^ Press the Door button.
^ Open the door.
^ Remove the laundry.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^ Switch the dryer off by pressing the
l-On/0-Off button.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (where there is no external
drainage of the water).
^ The condenser unit should be
checked and cleaned on a regular
basis.
Changing the programme
sequence
Changing a programme while it is
running
As long as the cooling down phase or
the anti-crease phase has not been
reached, it is possible to change a
programme after it has started by
turning the programme selector to a
different programme position.
To interrupt a programme
^ Switch the machine off with the
I-On/0-Off button.
To continue drying:
How to dry correctly
^ Switch the dryer on with the
I-On/0-Off button.
The programme will continue (only with
the Cottons, Minimum iron and Auto-
matic programmes).
Other programmes:
^ Press the Start button.
To cancel a programme
^ Turn the programme selector to
Finish or open the door.
Adding or removing laundry after a
programme has started
^ Press the Door button.
^ Open the door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Add or remove items.
^ Close the door.
^ Press the Start button.
13