Changing The Standard Drying Level In The Minimum Iron - Normal Programme - Miele T 234 C Operating Instructions Manual

Programmable functions
Changing the standard drying
level in the Minimum iron -
Normal programme
The drying level for this programme
is set at a standard level.
You have the option of changing this
to an increased drying level.
The machine is delivered with the
drying level set at Normal
You can change this to Normal+ (drier
than the standard drying level).
Important: the "Normal+" drying level
will work in addition to the "Altering the
residual moisture level in the Minimum
iron programmes " programmable
function, if you have already set this.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish .
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the dryer on with the
I-On/0-Off button.
C Wait until the Start indicator lamp
comes on . . .
D . . . and then release the Start button.
E Turn the programme selector to
Minimum iron - Normal .
42
F Pressing the Start button alters the
drying level.
– If the Drying indicator lamp is
flashing:
the standard drying level is
Normal+
– If the Drying indicator lamp is not
flashing, the increased drying level
is not activated and the drying level
will remain on the standard setting
( ).
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^ Make sure the dryer is switched off,
the door is closed and the
programme selector is at Finish and
then carry out steps A to E.
The Drying indicator lamp will show you
if the Normal+ drying level has been
set.
^ Switch off the dryer.
The check is complete.