Subscribe to Our Youtube Channel
Related Manuals for AUDAC KYDO
Summary of Contents for AUDAC KYDO
- Page 1 KYDO Design Column Speaker AUDAC PROFESSIONAL AUDIO EQUIPMENT KYDO Design Column speaker User Manual & Installation Guide...
- Page 2 A U D A C P R O F E S S I O N A L A U D I O E Q U I P M E N T User Manual & Installation Guide AUDAC http://www.audac.eu info@audac.eu...
-
Page 3: Table Of Contents
INSTALLATION ............................................4 DETERMINING LISTENING AREA AND MOUNTING HEIGHT ..........................4 OTHER POINT TO PAY ATTENTION TO ..................................7 CONNECTING THE KYDO ........................................8 CONNECTIONS ........................................... 8 LINE TRANSFORMER POWER TAPS....................................9 CONVERT FOR USE IN LOW IMPEDANCE APPLICATIONS ........................... 10 ADDITIONAL INFORMATION KYDO ..................................... -
Page 4: Introduction
This introduction briefly describes the possibilities of the KYDO design column speaker.. he KYDO was designed to meet professional demands en proves its worth in auditoria, conference rooms, meeting rooms, churches,… any place that requires a great flexibility in positioning and tuning, ass well as state-of-the-art audio quality and design. -
Page 5: Safety Requirements
Chapter Warning Only use the correct amplifier output voltage and impedance, exceeding these limits could cause damage, fire or other failures. Only install the speaker on surfaces that can accommodate the weight of the speaker and the mounting bracket. ... -
Page 6: Installation
The dimensions of the desired listening area has to be determined where out the correct mounting height and angle can be derived. A step by step installation procedure describes the method to determine the mounting height and angle for the KYDO. DETERMINING LISTENING AREA AND MOUNTING HEIGHT STEP 1: Determine the dimensions of the desired Listening Area. - Page 7 After the listening area, determine at which angle the loudspeaker array has to be mounted. The KYDO column speaker was designed to aim the sound just above the heads of the listeners, and it is recommended not to exceed an angle of 6°. There are two different approaches to determine the mounting angle, each with specific advantages and disadvantages.
- Page 8 Distance A between speaker and listening area...
-
Page 9: Other Point To Pay Attention To
This height is determined by aiming the 0° axis of the KYDO in the desired position, precisely above the ear level of the listener who’s the furthest away from the speaker. This can be adjusted by mounting the loudspeaker higher and lower on the wall. -
Page 10: Connecting The Kydo
Connecting the KYDO CONNECTIONS: At the back of the KYDO is a 3 pole euro terminal block connector provided to connect the amplifier with the KYDO column speaker. Depending of the speaker is used in 100V applications or low impedance applications, the wiring diagram is different. -
Page 11: Line Transformer Power Taps
LINE TRANSFORMER POWER TAPS: To adjust the power taps of the speaker, the front cover plate with the AUDAC logo should be removed very carefully. This is best done by carefully sticking a flat object under the cover plate (e.g. a small flat screwdriver). The cover plate is coming loose, without performing large forces. -
Page 12: Convert For Use In Low Impedance Applications
For use in low impedance applications, the internal switch of the speaker must be switched. To reach the internal switch, the front cover plate with the AUDAC logo should be removed very carefully. This is best done by carefully sticking a flat object under the cover plate (e.g. -
Page 13: Additional Information Kydo
Chapter Additional information KYDO TECHNICAL SPECIFICATIONS RMS Power 60 W Max Power 120 W Impedance 12 Ohm 500 Ohm / 20 W Line Transformer power 1000 Ohm / 10 W tappings 2000 Ohm / 5 W 4000 Ohm / 2,5 W... -
Page 14: Polar Patterns
Polar patterns 500 Hz 250 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz... -
Page 15: Personal Notes
Personal notes...
Need help?
Do you have a question about the KYDO and is the answer not in the manual?
Questions and answers