Advertisement
Quick Links
Advertisement
Related Manuals for AUDAC KYRA24
Summary of Contents for AUDAC KYRA24
- Page 1 KYRA24 User & Installation Manual www.audac.eu...
- Page 3 They come in three different models (KYRA6, KYRA12 and KYRA24) in terms of length and driver count, all are constructed with the identical high-quality aluminum cone full range drivers.
- Page 4 Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY • ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM AWAY • ALWAYS HANDLE THIS UNIT WITH CARE • CLEAN ONLY WITH DRY CLOTH • HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS •...
- Page 5 CAUTION • USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER • USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM. • ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE. EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
-
Page 6: Mounting The Speaker
2 supplied mounting screws into the pre-drilled and threaded holes at the back of the speaker cabinet. The KYRA24 comes with two different speaker parts included, which can be selected depending of the required incline angle. - Page 7 Once both speaker part and wall part are safely attached to their positions, the protective finishing cover can be assembled over the wall plate by clicking it. Afterwards the speaker can be assembled to the wall bracket by bringing both parts together and tightening them through the button head bolt and nuts together through an hex drive key.
-
Page 8: Connecting The Speaker
Connecting the speaker For connecting the KYRA24, the wires coming from the amplifier shall be connected to the 3-pin terminal block connector on the rear of the speaker. The polarity and pin designation is indicated on a label attached to the rear of the speaker and shown in the... -
Page 9: Additional Information
Incline angle Horizontal 0 ~ 42° left & right Vertical 0 ~ 6.5° and 6.5° ~ 13° down tilt Colour White KYRA24/W (RAL9003) Black KYRA24/B (RAL9005) Dimensions (W x H x D) 70 x 2006 x 101 mm (excl bracket) Weight 6.5 Kg... - Page 10 Notes...
- Page 11 Notes...
- Page 12 Notes...
Need help?
Do you have a question about the KYRA24 and is the answer not in the manual?
Questions and answers