Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AUDAC KYRA12/O Series
Summary of Contents for AUDAC KYRA12/O Series
- Page 1 KYRA12/O User & Installation Manual www.audac.eu...
- Page 3 Introduction Design column speakers The KYRA column speakers range is the elegant result of research in the field of phased array acoustics. The selection of the highest quality materials including aluminum cone 2” drivers guarantee an extraordinary detail and clarity for music and speech, which is uncommon for any kind of column speaker available from the market.
- Page 4 Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY • ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM AWAY • ALWAYS HANDLE THIS UNIT WITH CARE • CLEAN ONLY WITH DRY CLOTH • HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS •...
- Page 5 CAUTION • USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER • USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM. • ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE. EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
-
Page 6: Mounting The Speaker
Installing the KYRA Mounting the speaker Every KYRA speaker comes delivered with a two-way revolving bracket, making it possible to install the speaker at each position and focusing it into the desired direction. The metal constructed bracket ensures a solid and secure mounting of the loudspeaker to any possible location. - Page 7 Once both speaker part and wall part are safely attached to their positions, the protective finishing cover can be assembled over the wall plate by clicking it. Afterwards the speaker can be assembled to the wall bracket by bringing both parts together and tightening them through the button head bolt and nuts together through an hex drive key.
-
Page 8: Connecting The Speaker
Connecting the speaker The KYRA12/Ox speakers are designed for use in 70V and 100V public address systems. Before connecting the loudspeakers to the system, make sure the amplifier is switched off. The power tap selection of the KYRA12/O outdoor series speakers is made through the orientation of the waterproof AWX5™... -
Page 9: Additional Information
Additional Information Technical specifications KYRA12/O Max Power 240 Watt RMS Power 120 Watt Nominal impedance 12 Ohm 125 Ω – 70V/40W Line transformer taps 250 Ω – 100V/40W - 70V/20W 500 Ω – 100V/20W - 70V/10W Drivers 12 x 2” Alu cone full range Cross-over network Passive built-in (low-cut filter) Connectors... - Page 10 Notes...
- Page 11 Notes...
- Page 12 Notes...
Need help?
Do you have a question about the KYRA12/O Series and is the answer not in the manual?
Questions and answers