Circulating Air Mode; Cleaning The Extractor Hood - Gaggenau AI201102 Operating And Assembly Instructions Manual

Cleaning the extractor hood

Clean the exterior of your extractor hood with a soft
cloth and mild detergent solution.
Do not use any strong, caustic or abrasive cleaning
agents. Do not use any abrasive sponges or
brushes either.
Clean the stainless-steel extractor hood
(AI 200/AI 202) with stainless steel cleaner.
Do not place any objects with sharp-edged or rough
bottoms (e.g. ceramic cups) on the hood.

Circulating air mode

The activated charcoal filter eliminates kitchen
smells in the circulating air mode. In normal use
(1 to 2 hours daily), the activated charcoal filter
must be replaced approximately once a year.
If no activated charcoal filter is installed, kitchen
smells will not be eliminated.
The activated charcoal filter (KF 001-010) is
available through your specialist dealer. It is not
supplied with the appliance. Only use original
filters.
Installing or replacing the activated charcoal
filter
Remove the stainless steel grease filters. Position
the activated charcoal filter from beneath the
appliance into place and push in the clips on the
side.
To remove the activated charcoal filter, push in the
Fig. 15
clips on the side and remove the activated charcoal
filter downwardly.
Activated charcoal filters do not contain any
dangerous substances. They can be disposed of
through the household refuse collection.
10