Recording - D-Link DCS-3410 User Manual

Section 3 - Configuration
In this section, you can configure and schedule the recording setting for your IP camera.
Enable Select this option to enable the recording feature.

Recording:

Samba Auth:
To access your account on the Samba network drive, enter your
account or anonymous username and password.
Server:
The name of your Samba server.
Shared Folder:
The name of the shared folder used for recording.
Test:
Click this thumbnail to verify the connection status of your camera
to the Samba network drive.
Samba Status:
Displays the connection status that is determined by the system. You
can click Get Status to refresh the status.
Resolution:
Select your pre-defined profile from the drop-down menu.
When Storage is
When the recording storage area is full, you may choose to stop
full:
recording, or recycle the recording files so that your camera can
record the video continuously.
Continuous:
Always recording.
Event Based:
Records when Motion Recording, Digital Input 1, or Digital Input 
is triggered.
Prerecord:
A preset amount of time before motion recording is triggered.
Postrecord:
A preset amount of time after motion recording is triggered.
Select this option to manually configure the starting and ending time for the recording.
Continuous:
D-Link DCS-3410 User Manual
Recording
34