Hardware Installation - D-Link DCS-3410 User Manual

Section 1 - Product Overview

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector located on the Network Camera's back
panel and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector located on the Network Camera's
back panel (labeled DC 1V) and connect it to an AC power outlet.
Note: When you have a proper connection, the LED will turn green. The light may cycle
on and off and your computer may show an intermittent loss of connectivity, this is normal
until you have configured your Network Camera.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3410 will turn green to indicate a
proper connection.
D-Link DCS-3410 User Manual 8