D-Link DCS-3415 Quick Installation Manual

18x poe network camera

Hide thumbs Also See for DCS-3415:

Download this manual

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.

DCS-3415

18x PoE

Network

Camera

Hardware Installation

Connect the Ethernet Cable

Connect an Ethernet cable to the network cable connector located on the

Internet Camera's back panel and attach it to the network.

Connect Using Power-Over-Ethernet

Once you connect an Ethernet cable to your PoE switch or adapter, the

Power LED on the DCS-3415 will turn green to indicate a proper

connection.

Attach the External Power Supply

Attach the external power supply to the DC power input connector

located on the Network Camera's back panel (labeled DC 12V) and

connect the other end to an AC power outlet.

Note: The LED on the network camera will turn green, when you have a

proper connection,. The light may go on and off and your computer may

show an intermittent loss of connectivity, this is normal until you have

configured your Network Camera.

DCS-3415

18x PoE Network Camera

CD-ROM with

Manual and

Setup Wizard

CAT5 Ethernet

Cable

Power Adapter

Camera Stand

Page 1 Internet Camera’s back panel and attach it to the network. Connect Using Power-Over-Ethernet Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3415 will turn green to indicate a proper connection. Attach the External Power Supply Attach the external power supply to the DC power input connector located on the Network Camera’s back panel (labeled DC 12V) and...
Page 2 6. Why am I unable to access the 18x PoE Network Camera from a web browser? If a router or firewall is used on the network, the correct ports for the DCS-3415 may not be configured on the router or firewall. To correct the problem, you need to determine if the DCS-3415 is behind a router or firewall and if the router or firewall is properly configured for the ports the DCS-3415 is using.