Network Setup - D-Link DCS-3410 User Manual

Section 3 - Configuration
Use this section to configure the network connections for you camera. All relevant information must be entered accurately.
LAN Settings: Settings for your local area network.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be updated to your
camera automatically.
Static IP Address: You may obtain a static or fixed IP address and other network
information from your network administrator for your camera. A static
IP address will ease you for accessing your camera in the future.
IP Address: The fixed IP address.
Subnet Mask: The default value is "55.55.55.0." Used to determine if the
destination is in the same subnet.
Default Gateway: The gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of transmissions
to a different subnet.
Primary DNS: Primary domain name server that translates names to IP
addresses.
Secondary DNS: Secondary domain name server to backup the primary one.
Enable UPnP: Enable this setting to allow your camera to be configured as an UPnP
device in your network.
Enable UPnP port Enable this setting to allow the camera to add port forwarding entries into the router automatically.
forwarding:
Enable PPPoE: Enable this setting if you network is using PPPoE service.
D-Link DCS-3410 User Manual

Network Setup

7