SWEEX RO003 - QUICK_START_GUIDE Introduction Manual page 11

English version
Setting 3 PPPoE
1. Log in to the Router (see the section "Accessing the Router" above).
2. Left in the column, click on "Internet Provider Setup" or click on "Next".
3. Select the option "PPPoE". This setting is for providers who use a PPPoE connection.
4. Under "User Name" enter the user name you received from your provider.
5. Under "Password", enter the corresponding password.
6. Click on "Next". Click "Save" to save the settings.
7. In order to check whether the Internet connection has been set up successfully, go to the status screen by clicking "Status" left in the column.
The "WAN IP" section will display your Internet IP address. It can sometimes take up to 1 minute for this IP address to appear. You have now completed the
configuration and are ready to surf the Internet.
8. If your IP address continues to be displayed as 0.0.0.0, click on "Connect".
If after 1 minute your IP address still continues to show as 0.0.0.0, check the above steps.
12