Advertisement
Quick Links
SUMAKE
Air Geared Saw (Rear Exhaust)
Specification:
Blow Per Min
Stroke Length
Cutting Capacity
Motor
Overall Length
Air Consumption
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
ST-BW711
3,000 S.P.M.
Stroke Length
Thickness Steel 25mm
1.0HP
15-5/9" (395 mm)
8.5 CFM (240 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
4.85 lbs (2.2 kg)
Noise and Vibration:
Vibration
EN ISO 28927-8
Sound Pressure Level
Load:
15.3 m/s²
Uncertainty
K= 1.5 m/s
²
Noise
EN ISO 15744
Please always
load: 85 dB(A)
Sound power level
environment
load: 96 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-BW711-S-2407A-STF
Remark
wear ear
protector at
hearing!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-BW711
Summary of Contents for Sumake ST-BW711
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! K= 1.5 m/s K= 3dB ² Net Weight 4.85 lbs (2.2 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-BW711-S-2407A-STF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR GEARED SAW (REAR EXHAUST) Model/ Serial No.： ST-BW711 to which this declaration applies, complies with these normative documents: ... - Page 3 Sumake is a manufacturer and exporter of air mechanism, and may cause trouble. So, install an Before storing and after operation, oil the tool at tools since established.
-
Page 4: Parts List
ST-BW711 AIR GEARED SAW (REAR EXHAUST) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty BW710-01 Regulator Set BW711-20 Bevel Gear (8T) BW710-02 Snap Ring BW710-21 BW710-03 Valve Stem Set BW710-22 Clamp Nut BW710-04 Air Inlet BW710-23 Head Set... - Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-BW711 and is the answer not in the manual?
Questions and answers