Advertisement
Quick Links
SUMAKE
Vibration Reduction Air Body Saw & File
Specification:
Blow Per Min
Stroke Length
Overall Length
Air Consumption
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
ST-BO11
9,500 b.p.m.
10mm
6.3" (160 mm)
8.5 CFM (240 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
0.94 lbs (0.4 kg)
Noise and Vibration:
Vibration
EN ISO 28927-8
Sound Pressure Level
Load:
4.855 m/s²
Sound power level
load: 101.9 dB(A)
Uncertainty
²
K= 1.5 m/s
Noise
EN ISO 15744
Please always
load: 90.6 dB(A)
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-BO11-S-1808A-DPF
Remark
wear ear
hearing!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-BO11
Summary of Contents for Sumake ST-BO11
- Page 1 3/8” (10 mm) dB(A) due to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 0.94 lbs (0.4 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-BO11-S-1808A-DPF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： VIBRATION REDUCTION AIR BODY SAW & FILE Model/ Serial No.： ST-BO11 to which this declaration applies, complies with these normative documents: ...
- Page 3 2, up. by 2, up. hours of operation, oiling is necessary. hours of operation, oiling is necessary. 4-2 Storage 4-2 Storage Avoid storing the tool in a location subject to Avoid storing the tool in a location subject to ST-BO11-I-1808A-DP ST-BO11-I-1808A-DP...
-
Page 4: Parts List
ST-BO11 VIBRATION REDUCTION AIR BODY SAW & FILE PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty BO11-01 Cylinder Group BO11-27 Bhsc Screw BO11-02 Cylinder Front Group BO11-28 Washer BO11-03 Spindle Group BO11-29 Guide Rod BO11-04 Bolt BO11-30 Control Valves Whole Group... - Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-BO11 and is the answer not in the manual?
Questions and answers