Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Blow Per Min
Cutting Capacity
Stroke Length
Air Consumption
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Air Body Saw & File
ST-M5034
9,000 b.p.m.
2.6mm Steel Thickness
3.2mm Alum. Thickness
0.394" (10mm)
13 CFM (368 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
1.76 lbs (0.8 kg)
Noise and Vibration:
Vibration
EN ISO 28927-8
Sound Pressure Level
Load:
26.2 m/s²
Uncertainty
K= 1.5 m/s
²
Noise
EN ISO 15744
Please always
load: 82 dB(A)
Sound power level
environment
load: 93 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-M5034-S-2305D-D5F
Remark
wear ear
protector at
hearing!
Advertisement
Table of Contents
Related Manuals for Sumake ST-M5034
Summary of Contents for Sumake ST-M5034
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! K= 1.5 m/s K= 3dB ² Net Weight 1.76 lbs (0.8 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-M5034-S-2305D-D5F...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR BODY SAW & FILE Model/ Serial No.： ST-M5034 to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ...
- Page 3 Sumake is a manufacturer and exporter of air Before storing and after operation, oil the tool at tools since established. We have devote all our...
- Page 4 ST-M5034 AIR BODY SAW & FILE (REAR EXHAUST) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty M5034-01A Blade (32T) M5034-24 Packing M5034-01B Blade (24T) M5034-25 Washer M5034-02 Screw M5034-26 Screw M5034-03 Chuck Guide M5034-27A Valve Screw -Plastic M5034-04...
- Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-M5034 and is the answer not in the manual?
Questions and answers