Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Blow Per Minute
Cutting Capacity
Stroke Length
Overall Length
Air Consumption
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Air Body Saw & File
ST-66010
9,000 b.p.m.
Steel 3~5mm
14 mm
8.9" (227mm)
8.5 CFM (240 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
1.37 lbs (0.62 kg)
Noise and Vibration:
Vibration
EN ISO 28927-8
Sound Pressure Level
No load: 83.5 dB(A)
Load:
5.0 m/s²
No load: 94.5 dB(A)
Uncertainty
²
K= 1.5 m/s
Noise
EN ISO 15744
Please always
Sound power level
80 dB(A) due
Uncertainty
K= 3dB
ST-66010-S-1710B-S6F
Remark
wear ear
protector at
environment
noise level >
to risk of
impaired
hearing!
Advertisement
Table of Contents
Related Manuals for Sumake ST-66010
Summary of Contents for Sumake ST-66010
- Page 1 Air Hose (I.D.) 3/8” (10 mm) to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 1.37 lbs (0.62 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-66010-S-1710B-S6F...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR BODY SAW & FILE Model/ Serial No.：ST-66010 to which this declaration applies, complies with these normative documents: ...
- Page 3 The TOOL HOLDER will take 5 mm diameter shank files and small diamond files or regular small files in 3mm Shank diameter. The patented “UNIVERSAL SWIVEL AIR INLET JOINT” with speed regulator is equipped for better maneuverability and speed control of the tool. ST-66010-I-1707A-S6...
- Page 4 Saw Blade-24T (Opt.) 66009-01C Saw Blade-18T (Opt.) 66009-27 Screw 66009-01D Saw Blade-14T (Opt.) 66009-28 Spring 66009-02 Depth Regulator 66009-29 C Type Buckle 66010-03 Dust Proof [ST-66010] 66009-30 O-Ring 66009-04 Hexagon Socket 66009-31 Air Intake 66009-05 Housing 66009-32 Spring 66009-06 Throttle Lever 66009-33...
- Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-66010 and is the answer not in the manual?
Questions and answers