1. Manuals
  2. Brands
  3. Sumake Manuals
  4. Saw
  5. ST-77482
  6. Instruction manual

Sumake ST-77482 Instruction Manual

5" wet air ctting saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
ST-77482
ITEM NO.:
5" WET AIR CUTTING SAW
ST-77482-I-1407A-GI

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ST-77482 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sumake ST-77482

Summary of Contents for Sumake ST-77482

  • Page 1 INSTRUCTION MANUAL ST-77482 ITEM NO.: 5" WET AIR CUTTING SAW ST-77482-I-1407A-GI...

  • Page 2: Pad Installation

    Feature Spindle Oil Hole Loosen the screw in counter clockwise direction with a 5mm hex. spanner and lubricating the gear set with oil directly from the hole. Fabricators can maintain the machine themselves, save maintenance coset and extend duration of gear.

  • Page 3: Important Safety Instruction

    Important safety instruction Read all instructions before using this tool. All operators must be fully trained in its use and aware of safety rules. Maintenance  Oil 3cc lubricant (SAE #10 or equivalence) through air inlet before connecting the product to the air. Run the tool 15 seconds to allow air circulating the oil and well lubricate the cylinder.

  • Page 4: Before Operation

    Before operation Check the followings first: Make sure the workplace is suitable to perform cutting work. Verify if the capacity of air compressor could provide sufficient airflow rate for the tool. Drain the water in compressor tank; fill the lubricator with oil (SAE#10 or equivalence) and make sure no rust or problem found in the compressor.

  • Page 5: Specification

    3/8” (10 mm) dB(A) due to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 4.4 lbs (2.02 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-77482-S-1503B-GIF...

  • Page 6: Ec Declaration Of Conformity

    DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 5" WET AIR CUTTING SAW Model/ Serial No.： ST-77482 to which this declaration applies, complies with these normative documents: ...

  • Page 7: Parts List

    ST-77482 5" WET AIR CUTTING SAW PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 77482-01 Body Assembly 77482-46 Safe Lever 77482-02 Grip 77482-47 Retaining Ring 77482-03 Exhaust Cover 77482-48 Spring 77482-04 Screw 77482-49 O-Ring 77482-05 Screw 77482-50 Valve Spring...
  • Page 8 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
  • Page 9 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
  • Page 10 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
  • Page 11 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.

Table of Contents