Charging; Description Of The Led Indicators - Silvercrest RHYTHM GO Operation And Safety Notes

˜ Description of the LED indicators
Power
ON/OFF
Power ON
Power OFF
˜ Establishing a Bluetooth
Remove all plugs from the AUX-in jack 4 before you
attempt to establish a Bluetooth
Switch on the playback device and make sures its Bluetooth
mode is on.
On the product press the
LED 6 flashes white and a signal tone sequence sounds.
The product will now attempt to connect to the playback
device (e.g. smartphone or computer).
Status
Power ON
Bluetooth
connection
TWS
connection
PartyPlay
connection
AUX
connection

Charging

Low battery
Charging
LED color
6
LED flashes once per sec.
white
Bluetooth Pairing mode: LED
6
flashes white once per
sec.
Bluetooth Paired: LED
flashes white approx. every
5 sec.
TWS Primary unit: LED
flashes approximately every
5 seconds white
TWS Secondary unit: LED
6
soild white
Primary unit: LED
white
Secondary unit:LED
breathing white
6
LED Solid green
2
LED soild red ,Turn off
the red light after charging
completed
2
LED flash red
2
LED soild red, then red
light turns off after charging
completed
connection:
®
connection.
®
button 8 for 2 seconds until the
6
6
6
soild
6
GB/IE/NI
®
13