Connecting Via The Aux-In Jack - Silvercrest RHYTHM GO Operation And Safety Notes

Button
NOTE: When you change the volume on the product the
volume on the playback device will also so change. This volume
synchronisation function depends on the operating system and
the brand of your playback device.
˜ Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack 4 has a higher
priority over a Bluetooth
Once the AUX cable 14 is plugged into the AUX-in jack
4 , the Bluetooth
disconnected. Music playback is now switched to AUX-in
only and the LED 6 lights up green.
Function
Party play mode:
‒ Press and hold for 2 seconds to pair two
or more PartyPlay compatible speakers
(Different model) for a stereo sound for which
can connect up to 10 PartyPlay compatible
speakers. A signal tone will be heard if pairing
has been carried out successfully.
‒ Press and hold for 2 seconds again to break
the current connection, a signal tone will be
heard.
‒ Press briefly during playback to increase
the volume, one beep will sound when the
maximum volume has been reached.
‒ Press and hold for 2 seconds during playback
to skip forwards to the next title in the playlist.
‒ Press briefly during playback to decrease
the volume, one beep will sound when the
minimum volume has been reached.
‒ Press and hold the button until playback of the
current track jumps back to the beginning.
‒ Then the button must be released briefly and
held again.
‒ Previous title in the list will start.
NOTE: Depends on the playback
Application (App), skip to previous title operation
may differ slightly.
connection.
®
wireless connection will be
®
GB/IE/NI 15